Technology Laboratory

Robot Workers

It took more than 4 hours for Dimas and other scientists to assemble all the spare parts into a whole-worker robot over 2 meters tall and had a lot of equipment hidden all over its body. A cable connects the worker robot to a computer in the research room, some final testing needs to be done before the worker robot is activated.

"There were no problems with assembly, the data displayed on the computer showed that all parts of the robot were installed correctly" the scientist who checked the robot using the computer said to others.

Everyone was relieved, they spent a lot of time and also drained a lot of their brain cells just to assemble this one working robot, he said, if it turns out that there is a problem in the assembly then they have to disassemble and reassemble the problematic parts. It will certainly take a lot of time and effort, therefore these scientists are relieved after finding there are no problems in their assembly.

"Then let's put all the necessary programs into the robot workers" Dimas said.

The scientist immediately nodded, he then uploaded all the prepared programs into the worker robot. The program was quickly uploaded, just a few minutes later all the programs were successfully uploaded and with instructions from Dimas the worker robot was activated.

The robot stood upright with a height of 2 meters makes everyone have to lift his head slightly to see the face of the robot workers, the robot, both eyes lit up in blue color moving scan everything in the entire room including Dimas who was in front of him. Dimas raised his head towards this working robot, after seeing a brief look Dimas was quite satisfied with the appearance of this working robot.

"Call yourself No. 1, tell me what you can do" Dimas told the robot worker in front of him.

"Robot worker No 1 is activated, can do all physical work such as construction, mining, demolition, and others" Mechanical sound is heard from the worker robot.

After hearing the brief introduction of the worker robot No. 1 Dimas nodded in satisfaction, Dimas then looked at the pile of spare parts already arranged in the corner of the research room. These spare parts are spare parts for ten worker robots, the, they did not prepare more spare parts because all these spare parts already filled the room and from their assembly speed all these spare parts would be enough for them to spend several days assembling ten this robot worker.

"Immediately another worker's robot raft uses all those parts" Dimas said as he pointed towards the parts in the corner of the research room.

Dimas did not want to waste a lot of time just researching a fully automated production line for something unnecessary, in the robot program workers have provided many work manuals that allow robot workers to do various jobs including assembling other robot workers.

"The No. 1 worker robot accepted the task" said the worker robot with a mechanical voice.

In just 15 minutes the other worker robots have been completed assembled by the No. 1 worker robot, everyone is very amazed by the efficiency possessed by the worker robot, and the, previously those with more than 20 people needed more than 4 hours to assemble one worker robot, the, now the worker robots they previously assembled have assembled another worker robot in just 15 minutes and it is done alone.

"The speed of assemble is very good, contact the factory that provides these parts to start producing each part of spare parts and send them all to all shelters in Kalimantan" Dimas said to Dea who was standing in the crowd of scientists.

Dimas saw the No. 1 worker robot turn one of its fingers into a USB shape and plug it in the back of the head of the recently assembled worker robot. Worker robot No. 1 copied his program to the worker robot he assembled before, only takes a few seconds the worker robot No. 1 finally pulled out his finger in the form of a USB and turned it into its original appearance. When the No. 1 worker robot plucked his finger from the head of the worker robot that he assembled the eye of the worker robot turned blue and immediately stood upright like a worker robot No. 1 facing towards the scientists inside the research room.

"Robot worker No. 2 activated" The same mechanical sound as robot No. 1 was immediately heard.

Dimas just nodded, he then pointed back at the pile of spare parts next to the two working robots and said "Assemble all those parts into other working robots until you are ten in number, the activated worker robot will also perform this command and work together to work faster in the assembly of your colleagues" 

With orders from Dimas the two robot workers began assembling other robots, this time each robot will assemble one and in 15 minutes later two new robots have been assembled and become the No. 3 worker robot and No worker robot. 4. This time the four worker robots did not wait for orders from Dimas they directly took the remaining parts and assembled four other worker robots.

Everyone was so amazed by what this robot worker did, they finally understood why Dimas did not plan to create an automatic production line, this is because these worker robots can assemble other robots and with more and more of them more and more new robots can be assembled.

"What about the factory of robot spare parts workers? Are the appropriate spare parts in production?" Asked Dimas to Dea who was just about to approach Dimas.

"Production of all the parts needed has already begun by each factory, the factory leaders said that the average daily production will only be enough to make a thousand robots workers a day, the state-owned metal stockpile is still very little and is mostly used for the construction of underground cities so we can only be satisfied with this amount" Dea replied.

"No problem, for now the amount is enough" Dimas nodded, after all with the efficiency of the robot workers it will not take long to complete most projects such as the construction of underground cities.