The Demon King Mode System

CHAPTER 94: DEMON SWORD

The appearance of this Abyss demon iron made Roy suddenly realize that the Abyss has minerals!

How else. You can't say that Roy is slow, and you can't force someone who is learning to paint and design to think about what minerals are there when he looks at the soil and rocks…

Now that he thought about it carefully, Roy had indeed met many demons with weapons. Back then, he only thought that it was a weapon forged with fragments of their souls, but he ignored the materials they used to forge.

Looking at the surrounding mountains and the land below, Roy was sure that there were some minerals beneath this layer of earth, but they might not be like the demon iron Abyss.

It seemed that the Abyss gravity would become stronger with each level lowered. If the Abyss demon iron was only produced at a lower level than the Abyss, it meant that the iron would have to be formed under high pressure.

Roy tries to remove some of the iron bars, but he finds that it is impossible. The Iron Demon Abyss was extremely hard.

This is a very good weapon!

Roy tries to put some magic power into the magic iron and finds that the magic power works very smoothly, so he knew that weapons made with the Abyss demon iron could not only be used as physical attack weapons but also as sticks! Other than the unobstructed transmission of magic power, it even had a slight amplification effect on magic power. Isn't this the principle behind the magic wand?

Recalling Edrach's words, that the demon Abyss iron could only be forged using hellfire, Roy took out the seed of hellfire.

This little black flame had absolutely no heat when Roy held it in his hand and only lit it quietly. That's kind of weird. This is why it is called the seed of fire.

“Fat Tiger, come here!” Roy waved at Fat Tiger.

Due to the clashing attributes, Roy was unable to join this hellfire seed.Of course, as long as he was willing to waste his soul, he could use the system to determine the hellfire ability for himself. However, it would probably take a lot, so Roy planned to use Fat Tiger first. Once he fused with the hellfire, Roy would look at what characteristics he had and whether it was strong before deciding whether he wanted to have the hellfire ability.

Similarly, Roy could actually modify Fat Tiger's attributes to complete the creation of hellfire. But with the seed of fire, Roy would naturally not eat his soul.

Fat Tiger came obediently, and Roy gave the fire seed to the head of his fire attribute. After swallowing the fire seeds, he instantly trembled in pain.

“What is going on?!” Roy's shocked.

The system notification popped into his mind. “The life you created, ‘Fat Tiger’, is being transformed by external energy. The success rate of transformation is 97%. Do you want to continue?”

Fortunately, with this hint, Roy reacted immediately. Fat Tiger's pain should have been caused by the nature of the hellfire seed, not by an accident. Because the success rate of the transformation was so high, Fat Tiger only needed to survive.

Roy could only comfort Fat Tiger while watching his changes nervously.

After all, there is still a 3% chance of failure right?

However, for some reason, a sentence suddenly crossed Roy's mind. If the merger fails, this will be a godly book …

This was what he used to ridicule the author when he read the novel in the past, but he suddenly remembered it now …

Fortunately, this didn't happen. After a while, the pain of Fat Tiger gradually subsided, and at the same time, black flames started burning his body.

This black hellfire was completely different from the condition of the fire seed. It had a ferocious and arrogant high temperature, and even Roy could not help but distance himself from it unconsciously.

After devouring the seed of fire, the fire attribute in the body of the Fat Tiger had changed. The original bright orange flame was completely replaced by the black hell fire.

Under Roy's command, Fat Tiger breathed fire into a distant rock. The stone melted not long after coming into contact with the black flames, and although the Fat Tiger stopped breathing, the black flame did not extinguish. It lasted until the stone completely turned into magma before it was completely extinguished.

So, Roy finally knew what the nature of the hellfire was. The temperature is high, and difficult to extinguish. No wonder legends say that the fires of hell cannot be extinguished. It cannot be extinguished it is definitely impossible, but it will definitely burn for longer …

Correspondingly, this type of Hell Flame Breath also consumed more magic power. Fat Tiger looked exhausted after spitting it out. It seems that using this kind of high-level demon fire when your magic power is still low is not worth it, and it can only be used as the ultimate move.

After allowing Fat Tiger to rest for a while to recover his magic power, Roy plans to make him use hellfire to help him melt the Abyss demon iron. He took this opportunity to consider what kind of weapon he should forge.

Roy is used to fighting with his bare hands, mostly using his claws and tail. Roy even planned to turn his claws into adamantium, but as he gradually learned how to use magic power, he began to fight more with magic power. As such, this modification plan was put aside and did not seem to be of much importance.

Now that he had the demon Abyss iron in hand, forging weapons became a way to combine physical attacks and magic power attacks.

In general, weapons were easy to use, and some made by the demons Roy saw were extremely crude. It could be a hammer or an axe. Of course, there was also a demon scythe like the one that high-class demon Xeron used, which looked quite cool. But it seemed that at a higher level, like a demon king, almost all of them used demon swords!

Therefore, Roy decided to make a demon sword!

Roy draws a print on the system interface, which he will use to create sword embryos. After Fat Tiger's magic power recovered, Roy had him spew out hellfire to help him melt the Abyss demon iron. Then he poured the molten iron into the mold to make the sword embryo and then it continued to be polished and shaped.

However, Roy realized that he had underestimated the difficulty of forging an iron weapon. Those who had never learned to forge could not play around with these objects. The sword embryo he made with the prints had many grinds, and its thickness was uneven. It was as rough as the other demons created.

Roy had no choice but to seek help from the system. Fortunately, although this sword was not produced directly by the system, he could store it as a material image and then modify it.

So, Roy invented a new function of the system …

This made Roy suddenly realize that he could determine the performance of the sword after forging it, and it would not be limited to the properties of the Abyss demon iron.

The excited Roy once again did the retouching work…

Three days later, an evil demon sword appeared. The pitch-black sword had a slender shape, narrowing from the blade of the sword to the tip of the sword. The base of the sword had a demon as its design. The demon skull bit the sword blade, and a pair of red devil eyes were engraved on the skull. The arched demon horn formed a cross-shaped sword protector, the handle was layered bones one after another, and the sword hilt was also a pair of demon horns.

The entire sword was carved with a demonic character that even Roy had no idea what it meant. They were usually hidden in swords, and only when he entered magic power would the demon character light up and emit a faint blue light.

The entire sword looked relatively large as it needed to match Roy's current height. That's about 1. Height 5 meters. As Roy stood up and held the sword, it happened that the sword reached his chest.

To define the demon sword, Roy did not hesitate to spend a lot of souls.

[Devil Sword (No Name)]

Material: abyss demon iron

Weight: ???

Attack Power: 100

Magic Power Amplification: 1. 5x

[Blooding]: The wounds caused by this sword will not heal normally.

[Absorption of Strength]: Enemies injured by this sword will have a portion of their strength absorbed to increase the user.

[Recognition]: This sword can only be used by demons who have the real name Bacronsha.

This was an attribute he could define for now. Roy had obtained the amplification number of magic power after repeated experiments. The initial amplification of the demon iron Abyss was only around 1. 2. But when Roy tries to increase the amplification of magic power, he finds that each increase by 0.1 is very difficult, and the number of souls consumed increases exponentially. 1. 5 improvement almost reached its limit.

Roy did not forcibly specify the two attribute definitions of Bleeding and Power Absorption and instead handed them over to the system for adaptation.

As for the Acknowledgement attribute, Roy did not want to separate his soul fragment, so he simply replaced it with this attribute.

Furthermore, whether the sword was strong or not also involved a problem. That's the power of his attack!

When Roy wanted to add the attack power attribute to the demon sword, the system told him that there was no reference object.

The so-called reference object was something Roy had to find, like a knife. Once he defined the attack power of the blade as one and stored it as material, any attack power Roy mounted in the future would use that blade for reference and comparison. The attributes for the toughness of the small blade material, sharpness, and so on were one, so the attack power was ten times ten times the strength of this blade.

This means that the higher the number, the harder it is to reach, and the more souls it consumes.

This forging of the demon sword by Roy consumed a lot of terrifying souls. He used more than 1400 souls, and most of them were setting the force of attack. After setting it up to a hundred, Roy realizes that his consumption is too terrible to keep increasing it, so he decides to let it go for a while.

Even so, the effect was still very surprising. The demon sword had an extremely powerful destructive power. He was unable to find any good trial materials in the Abyss, but his sword could even split large stones, and the pieces were extremely fine.

When Roy held the sword and entered its magic power, the entire sword would emit an intense cold aura, and under the strengthening of the magic power, Roy's cold aura became even stronger.

“OK, I'll call you Frostmourne!” Said Roy. In fact, he created this sword based on Frostmourne's design.